UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1119
24-02-02 System Options for Transfer –
MOH or Ringback on Transferred
Calls
Use these options to enable (0) or
disable (1) MOH on Transfer. If
enabled (0), a transferred caller
hears Music on Hold while their call
rings the destination extension. If
disabled (1), a transferred caller
hears ringback while their call rings
the destination extension. For this
option to work with voice mail, the
transferred call must be an
unscreened transfer.
0 = Hold Tone
1 = Ring Back Tone
(default = 0)
3
24-02-03 System Options for Transfer –
Delayed Call Forwarding Time
If activated at an extension,
Delayed Call Forwarding occurs
after this time (0~64800 seconds).
This also sets how long a
Transferred call waits at an
extension forwarded to Voice Mail
before routing to the called
extension mailbox.
0~64800 (seconds)
(default = 10 seconds)
3
24-02-04 System Options for Transfer –
Transfer Recall Time
Set the Transfer Recall Time
(0~64800 seconds). An
unanswered transferred call recalls
to the extension that initially
transferred it after this time. This
time also sets how long a
transferred call camps-on to a busy
extension.
0~64800 (seconds)
(default = 30 seconds)
3
24-02-05 System Options for Transfer –
Message Wait Ring Interval Time
For Single Line Telephones (SLTs)
without message waiting lamps,
this is the time between intermittent
ringing. If this value is set to 0, the
system rings once.
A release transfer to a busy
Department Group only
follows this time if the
Department Group is set to 0
= No Queue in Program
16-01-10, if set to 1, 2 or 3 it
follows the time in Program
24-02-04.
0~64800 (seconds)
(default = 30 seconds)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
To Next Page
Loading...
