NEC Univerge SV8100 - Page 1161

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1137
Operation
To queue for a busy trunk:
1. Try to access the busy trunk.
2. Dial
# or press Trunk Queuing/Camp-On key (Program 15-07 or SC 751: 35).
3. Hang up to leave a Trunk Queuing request.
- OR -
Wait Off-Hook to Camp-On to the trunk.
To answer when Trunk Queuing calls you back:
1. Lift the handset.
To cancel a Trunk Queueing/Camp-On request:
1. At the multiline terminal, press idle Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 770.
3. At the multiline terminal, press Speaker to hang up.
- OR -
At the single line telephone, hang up.
20-31-01 Timer Class Timer Assignment –
Trunk Queuing Callback Duration
Time
Trunk Queuing Callback rings an
extension for this amount of time.
0~64800 (seconds)
(default = 15 seconds)
3
20-31-02 Timer Class Timer Assignment –
Callback / Trunk Queuing Cancel
Time
The system cancels an extension
Callback or Trunk Queueing
request after this amount of time.
0~64800 (seconds)
(default = 64800
seconds)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3