EasyManua.ls Logo

NEC Univerge SV8100 - Page 1175

NEC Univerge SV8100
1386 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1151
16-01-10 Department Group Basic Data
Setup – Enhanced Hunt Type
Set the type of hunting for each
Department Group:
0 = No Queuing
1 = Hunting When Busy
2 = Hunting When Not Answered
3 = Hunting When Busy or No
Answer
0 = No queuing
1 = Hunting When Busy
2 = Hunting When Not
Answered
3 = Hunting When Busy
or No Answer
(default = 0)
3
16-02-01 Department Group Assignment
for Extensions
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Department Groups
1-64
Priority 1-512
Default = All extensions
in Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 512 priority = 512
3
20-02-12 System Options for Multiline
Telephones – Forced Intercom
Ring (ICM Call Type)
Use this option to enable (1) or
disable (0).
0 = Disable (Voice)
1 = Enable (Signal)
(default = 1)
3
20-06-01 Class of Service for Extensions Assign Class of Service (1~15) for
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension ports
= Class 1
3
20-08-05 Class of Service Options
(Outgoing Call Service) – Dial
Number Preview (Preset Dial)
Turn off extension user ability to
use Dial Number Preview.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
Determine if the ISDN calling line
identity presentation and screening
indicators are to be allowed.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
Set to extended Park for Class of
Service of the Announce ports.
1 = Extended for Program
24-01-07).
0 = Off
1 = On
(default = 0 for COS
1~15)
3
20-13-10 Class of Service Options
(Supplementary Service) – Barge-
In Monitor
Enables the extension Barge-In
Mode to be speech mode (0) or
Monitor mode (1).
0 = Off
1 = On
(default: 0 for COS
1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3

Table of Contents

Other manuals for NEC Univerge SV8100

Related product manuals