NEC Univerge SV8100 - Page 1191

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1167
Assign Trunks As Automated Attendant Trunks – Method 1
Assign Trunks As Automated Attendant Trunks – Method 2
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
22-02-01 Incoming Call Trunk Setup Assign Service Type 4 to each
trunk you want to ring into Voice
Mail as a Direct Inward Line (DIL).
0 = Normal
1 = VRS (second dial
tone if no VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
3
22-07-01 DIL Assignment Assign the master/pilot number of
the voice mail group from Program
11-07-01 as the DIL destination. If
all Voice Mail ports are in the same
unique Extension (Department)
Group (see Program 16-02 above),
the DIL rings another Voice Mail
port if its assigned port is busy.
Extension Number
(maximum eight digits)
(default not assigned)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
22-02-01 Incoming Call Trunk Setup Assign Service Type 0 to each
trunk you want to ring into Voice
Mail as a normal line.
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
3
22-04-01 Incoming Extension Ring Group
Assignment
Assign Ring Group 102 for an
In-Skin/External Voice Mail, or 103
for a Central Voice Mail as the
destination.
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring for
incoming Ring Group 1
calls. No other
extensions ring for
incoming Ring Group 1
calls.
3