NEC Univerge SV8100 - Page 1207

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1183
Operation
To call a UCD Group:
1. At the multiline terminal, press the Speaker key.
- OR -
At single line telephone, lift the handset.
2. Dial the UCD group (department) extension or pilot number.
 The system routes the call to the first free telephone in the (UCD group) department.
To log out of your UCD (Department Calling) Group:

While you are logged out, UCD (Department Calling) cannot route calls to your extension.
1. Press the Speaker key.
2. Dial 650 and 1.
- OR -
Press Uniform Call Distribution Log In key (Program 15-07 or SC 751: 46).
 The key lights while you are logged out.
To log back in to your UCD (Department Calling) Group:

While you log back in, Uniform Call Distribution routes calls to your extension.
1. Press the Speaker key.
2. Dial 650
and 0.
- OR -
Press UCD (Department Calling) Log In key (Program 15-07 or SC 751: 46).
 The key goes out when you log back in.
24-05-01 Department Group Transfer
Target Setup
Assign the Speed Dialing bin to
each Department Group to hold the
destination for the immediate
automatic transfer of ICM and
transferred calls to the Department
Group feature.
0~1999
(default = 1999)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3