NEC Univerge SV8100 - Page 122

Issue 1.0 UNIVERGE SV8100
2 - 98 Automatic Route Selection
12-07-01 Text Data for Night Mode Use this program to make an original
text message, which, depending on
programming, can be displayed on
an LCD of a multiline telephone in
each Mode.
Night Mode Service
Group Number:
01~32
Day/Night Mode: 1~8
Text Message:
Maximum 12
Characters (alphabetic
or numeric)
Default Text Messages
for Day/Night Modes:
Mode 1 = No Setting
Mode 2 = <Night>
Mode 3 = <Midnight>
Mode 4 = <Rest>
Mode 5 = <Day2>
Mode 6 = <Night2>
Mode 7 = <Midnight2>
Mode 8 = <Rest2>
3
12-08-01 Night Mode Service Range Define the changing range of toggle
key for each Day/Night Mode.
Night Mode Service
Group Number:
01~32
Range: 2~8
(default = 2)
3
14-05-01 Trunk Group – Trunk Group
Number
Program trunks of the same carrier
type into the same trunk group.
Trunks 1-200
Trunk Group 1-100
Priority - 1-200
(default = All trunks in
Trunk Group 1 with
priorities of:
Trunk 1 = Priority 1
Trunk 2 = Priority 2
Trunk 200 = Priority
200)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3