NEC Univerge SV8100 - Page 123

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 99
14-07-01 Trunk Access Map Setup Set up the Trunk Access Maps. This
sets the access options for trunks.
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is on
Hold).
3
15-06-01 Trunk Access Map for Extensions Assign Trunk Access Maps to
extensions.
Trunk Access Maps:
1~200
(default = 1)
3
20-03-04 System Options for Single Line
Telephones – Dial Sending Start
Time for SLT or ARS
When ARS or an analog extension
user accesses a trunk and dials an
outside call, the system waits this
interval before outdialing the first
digit.
0~64800 (seconds)
(default = 1 second)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
an extension.
Day/Night Mode: 1~8
Class of Service for
Extensions: 1~15
Defaults:
Extension number 101
as Class 15.
All other extension
numbers are set as
Class 1.
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3