NEC Univerge SV8100 - Page 1282

Issue 1.0 UNIVERGE SV8100
2 - 1258 Voice Mail Integration (Analog)
15-02-35 Multiline Telephone Basic Data
Setup – Message Waiting Lamp
Cycle for Calling Extension
This option allows you to select the
Message Waiting flash pattern for
the station that set the Message
Waiting reminder.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 7)
3
15-02-36 Multiline Telephone Basic Data
Setup – Message Waiting Lamp
Cycle for Called Extension
This option allows you to select the
Message Waiting flash pattern for
the station that receives the
Message Waiting reminder.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 3)
3
15-02-37 Multiline Telephone Basic Data
Setup – Voice Mail Message Wait
Lamp Color
This option allows you to select the
Message Waiting flash pattern for
the station that set the Message
Waiting reminder.
0 = Green
1 = Red
(default = 1)
3
15-02-38 Multiline Telephone Basic Data
Setup – Voice Mail Message Wait
Lamp Cycle
This option allows you to select the
Message Waiting flash pattern for
the station that set the Message
Waiting reminder.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 3)
3
15-03-01 Single Line Telephone Basic Data
Setup – SLT Signaling Type
For each UNIVERGE SV8100
voice mail extension, this option
must be set to 0.
0 = DP
1 = DTMF
(default = 1)
3
15-03-03 Single Line Telephone Basic Data
Setup – Terminal Type
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always enter
1 (e.g., receive DTMF tones).
0 = Normal
1 = Special
(default = 0)
3
15-03-09 Single Line Telephone Basic Data
Setup – Caller ID Function – For
External Module
This option must be set to 0 when
voice mail is used or the integration
code for the disconnect function is
incorrect.
0 = Disable
1 = Enable
(default = 0)
3
15-03-16 Single Line Telephone Basic Data
Setup – Special DTMF Protocol
Send
Determine whether or not to send
the extension number of the phone
forwarded to the extension when
Program 15-03-04 is set to Special
(1) and not in the VM group.
0 = No
1 = Yes
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3