NEC Univerge SV8100 - Page 1284

Issue 1.0 UNIVERGE SV8100
2 - 1260 Voice Mail Integration (Analog)
16-01-05 Department Group Basic Data
Setup – Extension Group All Ring
Mode Operation
Set if all members of the group
should ring automatically (1) or
through the use of the service code
(0) defined in Program 11-12-09.
Selecting automatic will override
the settings of Programs 16-01-03
and 16-01-04.
0 = Manual
1 = Automatic
(default = 0)
3
16-01-06 Department Group Basic Data
Setup – STG Withdraw Mode
Use to set the STG withdraw mode
for each department group.
0 = Disable (Camp On)
1 = Enable (Overflow
Mode)
(default = 0)
3
16-01-07 Department Group Basic Data
Setup – Call Recall Restriction for
STG
Determine whether or not an
unanswered call transferred to a
Department Group should recall the
extension from which it was
transferred.
0 = Disable (Recall)
1 = Enable (No Recall)
(default = 0)
3
16-01-09 Department Group Basic Data
Setup – Department Hunting No
Answer Time
Set how long a call rings a
Department Group extension
before hunting occurs.
64800 (seconds)
(default = 15 seconds)
3
16-01-10 Department Group Basic Data
Setup – Enhanced Hunt Type
Set the type of hunting for each
Extension (Department) Group.
0 = No queuing
1 = Hunting When Busy
2 = Hunting When Not
Answered
3 = Hunting When Busy
or No Answer
(default = 0)
3
16-02-01 Department Group Assignment
for Extensions
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Department Groups
1-64
Priority 1-512
Default = All extensions
in Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 512 priority = 512
3
20-02-09 System Options for Multiline
Telephones – Disconnect
Supervision
Enable (1) disconnect supervision
for the system.
0 = Disable
1 = Enable
(default = 1)
3
20-03-01 System Options for Single Line
Telephones – SLT Call Waiting
Answer Mode
For a busy single line (500/2500
type) telephone, set the mode used
to answer a camped-on trunk call.
The default setting should be used
[0 = Hookflash (Hooking)].
0 = Hookflash (Hooking)
1 = Hookflash + Service
Code 654
(default = 0)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
the voice mail extensions. You
should use COS 14 for all time
modes.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3