NEC Univerge SV8100 - Page 1289

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1265
45-01-14 Voice Mail Integration Options –
CCIS Centralized Voice Mail
Number
Assign the pilot number to
Centralized Voice Mail over CCIS
Link. This is assigned only in
the remote switches.
Dial (up to eight digits)
(default not assigned)
3
45-01-15 Voice Mail Integration Options –
Analog Voice Mail Protocol
Selection
Assign whether DTMF sent to the
Analog VM follows the Fixed (0) or
the Programmed (1) leading digits.
Program 45-04-01~09 is where the
programmed digits are assigned.
0: Fixed
1: Program
(default = 0)
3
45-01-16 Voice Mail Integration Options –
Voice Mail FAX Digit Add
Assignment
Assign the leading digits (up to
four) to show in front of extension
numbers sent to Analog ports
assigned to 1 (Yes) in Program
15-03-16.
Up to four digits
(default = 0)
3
45-01-17 Voice Mail Integration Options –
Reply Mail Box Number
Whether or not to include the
mailbox number in the analog voice
mail protocol.
0 = No
1 = Yes
(default = 1)
3
45-01-18 Voice Mail Integration Options –
Trunk Number Mapping
Assign the digits of trunk number
mapping.
2~3
(default = 2)
3
45-04-01 Voice Mail Digit Add Assignment
– Remote Logon (Internal)
Use to define the digits for remote
logon (internal).
Up to four digits
(default not assigned)
3
45-04-02 Voice Mail Digit Add Assignment
– Direct Logon
Use to define the digits for direct
logon.
Up to four digits
(default not assigned)
3
45-04-03 Voice Mail Digit Add Assignment
– Transfer Message
Use to define the digits for transfer
message.
Up to four digits
(default not assigned)
3
45-04-04 Voice Mail Digit Add Assignment
– Forward-All
Use to define the digits for forward
all.
Up to four digits
(default not assigned)
3
45-04-05 Voice Mail Digit Add Assignment
– Forward-Busy
Use to define the digits for forward
busy.
Up to four digits
(default not assigned)
3
45-04-06 Voice Mail Digit Add Assignment
– Forward RNA
Use to define the digits for forward
RNA.
Up to four digits
(default not assigned)
3
45-04-07 Voice Mail Digit Add Assignment
– Remote Logon
Use to define the digits for remote
logon.
Up to four digits
(default not assigned)
3
45-04-08 Voice Mail Digit Add Assignment
– Conversation Recording
Use to define the digits for
conversation recording.
Up to four digits
(default not assigned)
3
45-04-09 Voice Mail Digit Add Assignment
– Clear Down String
Use to define the digits for clear
down string.
Up to four digits
(default not assigned)
3
45-05-01 Voice Mail Send Protocol Signal
Without Additional Digits –
Remote Log-On Internal
Use to send trunk number and/or
station number information if
integrating to Voice Mail when
Program 45-04-XX is left blank and
45-01-15 is set to Program.
0:Off
1:On
(default = 0)
3
45-05-02 Voice Mail Send Protocol Signal
Without Additional Digits – Direct
Log-On
Use to send trunk number and/or
station number information if
integrating to Voice Mail when
Program 45-04-XX is left blank and
45-01-15 is set to Program.
0:Off
1:On
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3