NEC Univerge SV8100 - Page 1288

Issue 1.0 UNIVERGE SV8100
2 - 1264 Voice Mail Integration (Analog)
40-07-01 Voice Prompt Language
Assignment for VRS
Use to specify the language to be
used for the VRS prompts.
1 = US English
2 = UK English
3 = Australian English
4 = French Canadian
5 = Dutch
6 = Mexican Spanish
7 = Latin America
Spanish
8 = Italian
9 = German
10 = Madrid Spanish
11 = Norwegian
12 = Parisian French
13 = Brazilian
Portuguese
14 = Japanese
15 = Mandarin Chinese
16 = Korean
17 = Reserved
18 = Reserved
19 = Reserved
20 = Flexible
(default = 3)
3
45-01-01 Voice Mail Integration Options –
Voice Mail Department Group
Number
Assign which Extension
(Department) Group number is to
be assigned as the voice mail
group. An entry of ‘0’ means there
is no voice mail installed.
Department Groups: 0,
1~64
0~64
0 = No Voice Mail
(default = 0)
3
45-01-02 Voice Mail Integration Options –
Voice Mail Master Name
Enter the Voice Mail master name
up to 12 characters.
Up to 12 Characters
(default = Voice Mail)
3
45-01-04 Voice Mail Integration Options –
Park and Page
Enable (1) or disable (0) the system
ability to process the Voice Mail
Park and Page () commands. You
should normally enable this option.
0 = Off
1 = On
(default = 1)
3
45-01-05 Voice Mail Integration Options –
Message Wait
Enable (1) or disable (0) the system
ability to process the Voice Mail
Message Wait (
#) commands. You
should normally
enable this option.
If enabled, be sure that the
programmed Message Notification
strings do not contain the code
#9
for trunk access. When using an
external voice mail and centrex
transfer, this option should be
disabled or the service code
#3 in
Program 11-12-42 will need to be
changed.
0 = Off
1 = On
(default = 1)
3
45-01-06 Voice Mail Integration Options –
Record Alert Tone Interval Time
This sets the time (0~64800
seconds) between Voice Mail
Conversation Record alerts.
0~64800 (seconds)
(default = 30)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3