NEC Univerge SV8100 - Page 1287

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1263
22-08-01 DIL/IRG No Answer Destination For Voice Mail Overflow, enter the
Ring Group that unanswered DILs
to Voice Mail will ring after the DIL
Call Waiting time (PRG 22-01-04).
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
3
24-02-02 System Options for Transfer –
MOH or Ringback on Transferred
Calls
Use this option to enable (0) or
disable (1) MOH on Transfer. If
enabled (0), a transferred caller
hears Music on Hold while their call
rings the destination extension. If
disabled (1), a transferred caller
hears ringback while their call rings
the destination extension. For this
option to work with voice mail, the
transferred call must be an
unscreened transfer.
0 = Hold Tone
1 = Ring Back
Tone
(default = 0)
3
24-02-03 System Options for Transfer –
Delayed Call Forwarding Time
Set the interval a transferred call
waits at a forwarded extension
before routing to the called
extension mailbox.
0~64800 (seconds)
(default = 10)
3
40-03-01 Message Recording Setup –
Voice Mail Recording Time
Input the maximum recording time
per voice mail message.
1 to 10 minutes
(default = 1)
3
40-03-02 Message Recording Setup –
Guidance Message in Case
Recording not Allowed
Use to define the guidance
message in case recording not
allowed in the Voice Mail.
0 = Fixed Guidance
Message
1 = Answer Message of
Mailbox
(default = 0)
3
40-03-03 Message Recording Setup –
Response Message Automatically
Sent out when Busy
Use to define the response
message automatically sent out of
the Voice Mail when busy.
0 = Disable (No)
1 = Enable (Yes)
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3