NEC Univerge SV8100 - Page 1315

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 1291
22-04-01 Incoming Extension Ring Group
Assignment
Use this program to assign
extensions (up to 32) to Ring
Groups. Calls ring extensions
according to Ring Group
programming.
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring for
incoming Ring Group 1
calls. No other
extensions ring for
incoming Ring Group 1
calls.
3
22-14-01 VRS Delayed Message for IRG –
1st Waiting Message Start Time
For each Ring Group, set how long
the system waits before playing the
first message (0~64800 seconds).
This timer is also used for VRS
Waiting Message.
0~64800 (seconds)
(default = 0)
3
22-14-02 VRS Delayed Message for IRG –
1st Waiting Message Number
For each Ring Group, select the
message number to be played as
the first message (0~48). This
program is also used for VRS
Waiting Message.
0~101
0 = No Message
101 = Fixed Message
(default = 0)
3
22-14-03 VRS Delayed Message for IRG –
1st Waiting Message Sending
Count
For each Ring Group, set the
number of times the first message
is played (0~255). This program is
also used for VRS Waiting
Message.
0~255 (time)
(default = 0)
3
22-14-04 VRS Delayed Message for IRG –
2nd Delayed Message Number
For each Ring Group, select the
message number to be played as
the second message (0~48). This
program is also used for VRS
Waiting Message.
0~101
0 = No Message
101 = Fixed Message
(default = 0)
3
22-14-05 VRS Delayed Message for IRG –
2nd Delayed Message Sending
Count
For each Ring Group, set the
number of times the second
message is played (0~255). This
program is also used for VRS
Waiting Message.
0~255 (time)
(default = 0)
3
22-14-06 VRS Delayed Message for IRG –
Tone Kind at Message Interval
For each Ring Group, determine
what the caller hears between
messages (0 = Ringback Tone, 1 =
MOH, 2 = BGM). This program is
also used for VRS Waiting
Message.
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
(default = 0)
3
22-14-07 VRS Delayed Message for IRG –
Disconnect Time After the end of
VRS Waiting Message
For each Ring Group, set how long
the system waits after playing the
VRS message before
disconnecting the call. To prevent
the call from disconnecting, set this
option to 0. This program is also
used for VRS Waiting Message.
0 = No Disconnect
1~64800 Seconds
(default = 60)
3
22-15-01 VRS Delayed Message for
Department Group – 1st Delayed
Message Start Time
For each Department Group, set
how long the system waits before
playing the first message (0~64800
seconds). This program is also
used for VRS Waiting Message.
0~64800 (seconds)
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3