NEC Univerge SV8100 - Page 1318

Issue 1.0 UNIVERGE SV8100
2 - 1294 Voice Response System (VRS)
25-07-03 System Timers for VRS/DISA –
Disconnect after VRS/DISA
retransfer to IRG
Set the timer for disconnecting a
call after it is re-transferred to a ring
group by VRS/DISA.
0~64800 (seconds)
(default = 60 seconds)
3
25-08-01 DISA User ID Setup – Password Set up password (six digits). ID 01 = 000001
ID 02 = 000002
:
ID 15 = 000015
3
25-13-01 System Option for DISA – VRS
Message Access Password
Enter the password DISA callers
must dial before the system allows
them to record, listen to or erase
VRS messages.
1~ 9, 0, , #
Six digits fixed
(default not assigned)
3
31-02-01 Internal Paging Group
Assignment – Internal Paging
Group Number
Assign extensions to Internal
Paging Groups (i.e., Page Zones).
0~64
(0 = No Setting)
Default: 1
0 for IP Station
1 for TDM Station
3
31-02-02 Internal Paging Group
Assignment – Internal All Call
Paging Receiving
Enable or Disable All Call Internal
Paging for each extension. If
allowed, extension can place and
receive All Call Internal Paging
announcements. If prevented,
extensions can only make (not
receive) All Call Internal Paging
announcements. If combined,
Paging zones should be restricted
as well, change the internal page
zone group in Program 31-07-01 to
0.
0 = Off
1 = On
(default = 1)
3
31-04-01 External Paging Zone Group –
Paging Group Number
Use to assign each External Paging
zone to an External Paging group.
0~8 (0 = No Setting)
Default:
Speaker 1 [PGD(2)-U( )]
= 1 (Group 1)
Speaker 2 [PGD(2)-U( )]
= 2 (Group 2)
Speaker 3 [PGD(2)-U( )]
= 3 (Group 3)
Speaker 4 [PGD(2)-U( )]
= 4 (Group 4)
Speaker 5 [PGD(2)-U( )]
= 5 (Group 5)
Speaker 6 [PGD(2)-U( )]
= 6 (Group 6)
Speaker 7 [PGD(2)-U( )]
= 7 (Group 7)
Speaker 8 [PGD(2)-U( )]
= 8 (Group 8)
Speaker 9
(CD-CP00-AUII) = 1
(Group 1)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3