Issue 1.0 UNIVERGE SV8100
2 - 1310 Wireless DECT (SIP)
10-19-01 VoIP DSP Resource Selection Select type of VoIP ETU DSP
Resource. This program setting has
no affect on the terminal/trunk port
assignment or usage.
0 = Common
1 = IP Extension
2 = SIP Trunk
3 = CCIS
4 = Use for NetLink
5 = Blocked
Default:
Resource 1 = 1
Resource 2~128 = 0
3
10-26-01 IP System Operation Setup – Peer
to Peer Mode
Use to Enable or Disable the Peer to
Peer feature for SIP IP stations.
0 = Off
1 = On
(default = 1)
3
10-26-03 IP System Operation Setup – SIP
Peer to Peer Mode
Use to Enable or Disable the Peer to
Peer feature for SIP IP stations.
0 = Off
1 = On
(default = 1)
3
84-06-01 PVA Data Setting – RTP Port
Number
Use this program to define the Media
Gateway starting RTP Port Number.
0~65535
(default = 10020)
3
84-06-02 PVA Data Setting – RTCP Port
Number
Use this program to define the Media
Gateway Starting RTCP Port Number
. The RTCP Port Number has to be
the (RTP port number + 1).
RTP Port Number + 1
(default = 10021)
3
84-06-04 PVA Data Setting – Fract Lost
Threshold
Use this program to define the
fractional lost threshold – this data will
be sent to the UNIVERGE SV8100
CD-CP00-AU when the value
exceeds the defined value.
0~100%
(default = 0)
3
84-06-05 PVA Data Setting – Packets Lost
Threshold
Use this program to define the packet
lost threshold – this data will be sent
to the UNIVERGE SV8100
CD-CP00-AU when the value
exceeds the defined value.
0~16777215
(default = 0)
3
84-06-07 PVA Data Setting – Jitter
Threshold
Use this program to define the Jitter
Threshold – this data will be sent to
the UNIVERGE SV8100
CD-CP00-AU when the value
exceeds the defined value.
0~4294967295
(seconds)
(default = 0)
3
84-06-09 PVA Data Setting – Delay LSR
Threshold
Use this program to define the Delay
threshold – this data will be sent to the
UNIVERGE SV8100 CD-CP00-AU
when the value exceeds the defined
value.
0~4294967295
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
To Next Page
Loading...
