NEC Univerge SV8100 - Page 1340

Issue 1.0 UNIVERGE SV8100
2 - 1316 Wireless DECT (SIP)
Operation
Placing an outside call with pre-dial:
1. Dial 9.
2. Press and hold the
# key to insert a pause (–), if necessary.
3. Dial the outside number.
4. Press the Green Phone key (On-Hook/Off-Hook).
For more information on the Wireless DECT (SIP) feature, refer to the NEC SIP DECT Solutions Manuals.
15-05-17 IP Telephone Terminal Basic Data
Setup – Calling Party Display Info
The part of the Invite message the
calling party information is taken
from. There are four choices:
Nickname: Displays the nickname
programmed in 15-05-04.
Display Name: Some SIP phones
have a Field called “Display Name”. If
configured, in the SIP phone, this will
display upon a call from that station.
User Part: Some SIP phones have a
field called “User Part”. If configured
in the SIP phone, this will display
upon a call from that station.
Extension: Display shows extension
of the SIP phone.
0 = Nickname
1 = Display Name
2 = User Part
3 = Extension
(default = 0)
3
15-05-18 IP Telephone Terminal Basic Data
Setup – IP Duplication Allowed
Group
If there is an adapter that has one IP
address coming into it but has
multiple extensions off of it. Assign
all the extensions to a group so that
way the CPU knows that the one IP
address is assigned to multiple
extensions.
0 = Not Used
1 = Group 1
2 = Group 2
3 = Group 3
4 = Group 4
5 = Group 5
6 = Group 6
7 = Group 7
8 = Group 8
9 = Group 9
10 = Group 10
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3