NEC Univerge SV8100 - Page 1360

Issue 1.0 UNIVERGE SV8100
3 - 20 Codes Tables
Paging, External 703 + zone (1~8)
703 + zone (0)
Making an external zone page
Making an external All Call page
19 + zone
20
Paging, External
Night Service
780 + relay number (0~8) Activating the general purpose relay. 51
Paging, Internal 701 + zone (1~8, 1~9 or
01~64)
701 + zone (0 or 00)
Making an Internal Zone Page
Making an internal All Call Page
21 + zone or
22
Park #6 + orbit (01~64) Parking a call in a system Park orbit
(01~64)
04 + orbit
6 + orbit (01~64) Picking up a call parked in a system
Park orbit (01~64)
04 + orbit
757 Parking a call or picking up a parked
call at an extension
-
Programmable
Function Keys
751 + key + code Changing the function of a
programmable key using 751 service
codes
-
752 + key + code Changing the function of a
programmable key using 752 service
codes
-
Save Number Dialed 715 Saving a number (from SLT) or dialing
a saved number
30
785 Clearing the number saved by Save
Number Redial number
-
Selectable Display
Messaging
4 + 3 + message (01~20),
or
4 + 3 + Hang up to cancel
Activating and Canceling Selectable
Display Messaging
17
Selectable Ring Tones 711 + 1 (ICM) or 2 (Trk) +
tone (1~8)
Listening to the incoming ring choices -
720 + 1 (ICM) + 2 (Trk) +
tone (1~8)
Changing your extension’s incoming
ring tones
-
System Programming
Password Protection
#
 #  Entering the system programming
mode
-
For this feature... Dial this Service Code...
1
When you are...
Also see
Function
Key...
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker first).