UNIVERGE SV8100 Issue 1.0
Codes Tables 3 - 21
Station Message Detail
Recording
621 Print the SMDR Extension
Accumulated printout
-
622 Print the SMDR Group Accumulated
printout
-
623 Print the SMDR Account Code
Accumulated printout
-
Tandem Trunking
(Unsupervised
Conference)
#8 Setting up an Unsupervised
Conference
-
Time and Date
Clock/Calendar
Display
728 + hour + minutes Setting the system Time -
Toll Restriction, Dial
Block
600 + code + 0 Using Dial Block -
601 + code + 0 A supervisor using Dial Block -
Toll Restriction
Override
775 + pswd (0000) + place
outside call
Temporarily overriding an extension’s
Toll Restriction
-
663 + digit code + line +
telephone number
Overriding Toll Restriction -
Transfer
06 Setting the Automatic Transfer for
each trunk line
-
07 Canceling the Automatic Transfer for
each trunk line
-
08 Setting the Destination for Automatic
Trunk Transfer
-
602 + Group number (1~8
or 01~64)
Setting Automatic Transfer Setup for
each extension group
-
603+ Group number (1~8 or
01~64)
Cancelling Automatic Transfer Setup -
604 + Group number (1~8
or 01~64) + mode +
extension
Setting the destination for Automatic
Transfer Setup for each extension
group
-
605 + Group number (1~8
or 01~64)
Setting Delayed Transfer for each
extension group
-
For this feature... Dial this Service Code...
1
When you are...
Also see
Function
Key...
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker first).
To Next Page
Loading...
