NEC Univerge SV8100 - Page 152

Issue 1.0 UNIVERGE SV8100
2 - 128 Call Appearance (CAP) Keys
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
Determine whether an extension
Class of Service should allow
normal or extended Park
(0 = Normal for Program 24-01-06,
1 = Extended for Program
24-01-07).
0 = Off
1 = On
(default = 0 for COS
1~15)
3
24-01-01 Hold Recall Time A call on Hold recalls the extension
that placed it on Hold after this time.
This time works with the Hold
Recall Callback Time.
0~64800 (seconds)
(default = 90)
3
24-01-02 System Options for Hold – Hold
Recall Callback Time
A call that is parked longer than the
programmed interval recalls the
extension where it was initially
parked.
0~64800 (seconds)
(default = 0)
3
24-01-03 Exclusive Hold Recall Time A call left on Exclusive Hold recalls
the extension that placed it on Hold
after this time.
0~64800 (seconds)
(default = 90)
3
24-01-04 Exclusive Hold Recall Callback
Time
An Exclusive Hold Recall rings an
extension for this time. If not picked
up, the call goes back on System
Hold.
0~64800 (seconds)
(default = 0)
3
24-01-05 Forced Release of Held Call Depending on the setting of
Program 14-01-16, the system
disconnects calls on Hold longer
than this time.
0~64800 (seconds)
(default = 1800)
3
24-01-06 System Options for Hold – Park
Hold Time - Normal
Set the Park Hold Time (0~64800
seconds). A call that is parked
longer than the programmed time
recalls the extension where it was
initially parked.
Refer to Flexible System
Numbering on page 2-515 for
setting Flexible Timeouts for Class
of Service.
0~64800 (seconds)
(default = 90 seconds)
3
24-01-07 System Options for Hold – Park
Hold Time - Extended (Recall)
Set the Extended Park Hold Time
(0~64800 seconds). A call that is
parked longer than the programmed
time recalls the extension where it
was initially parked.
0~64800 (seconds)
(default = 300
seconds)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3