NEC Univerge SV8100 - Page 157

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 133
15-02-21 Multiline Telephone Basic Data
Setup – Virtual Extension
Access Mode (when idle Virtual
Extension key pressed)
Determine whether a Virtual
Extension/Call Arrival Key (CAR)
should function as a DSS key, a
Virtual Extension, or a CAR key.
When DSS (0) is selected, the key
functions as a DSS key to the
extension and for incoming calls to
that extension. When Outgoing (1)
is selected, the key functions as a
virtual extension and can be used
for incoming and outgoing calls.
When Ignore (2) is selected, the key
functions as a CAR key and can
receive incoming calls only.
Virtual Extension Key
Mode
0 = DSS
1 = Outgoing
2 = Ignore
(default = 2)
3
15-07-01 Programmable Function Keys Use to assign functions to multiline
terminal line keys.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

00 ~

99
(Appearance Function
Code) (Service Code
752 by default)
(

03 + ICM = VE or
CAR where ICM is the
extension number of
the VE or CAR)
3
15-08-01 Incoming Virtual Extension Ring
Tone Setup
When an extension or a virtual
extension is assigned to the
function key on the key telephone,
select the ring tone when receiving
a call on that key.
For ACD CAR keys, only tone
pattern 1 (entry 0) can be used. The
remaining patterns are not checked
with this feature.
ICM Tone Pattern,
0 = Pattern 1
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
4 = Incoming Ring
Tone Extension
(default = 0)
3
15-09-01 Virtual Extension Ring
Assignment
Use to assign the ringing options for
an extension Virtual Extension Key
or Virtual Extension Group Answer
Key which is defined in Program
15-07.
Day/Night Mode: 1~8
0 = No Ringing
1 = Ring
(default = 0)
3
15-10-01 Incoming Virtual Extension Ring
Tone Order Setup
When two or more virtual
extensions are set on a function key
on the telephone, and the tone
pattern by which the sound of each
extension differs, the priority of ring
sound is set up.
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
Ring Tone
Order 1 Pattern 0 =
Pattern 1 (default)
Order 2 Pattern 1 =
Pattern 2 (default)
Order 3 Pattern 2 =
Pattern 3 (default)
Order 4 Pattern 3 =
Pattern 4 (default)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3