Issue 1.0 UNIVERGE SV8100
2 - 134 Call Arrival (CAR) Keys
15-11-01 Virtual Extension Delayed Ring
Assignment
Use to assign the delayed ringing
options for an extension Virtual
Extension or Virtual Extension
Group Answer keys (defined in
Program 15-09).
Day/Night Mode: 1~8
0 = Immediate Ring
1 = Delayed Ring
(default = 0)
3
15-18-01 Virtual Extension Key Enhanced
Options – Virtual Extension Key
Operation Mode
Defines if calls to a Virtual
Extension Key land on the Virtual or
on the extension / CAP / CO
appearance.
This is assigned for the Virtual
Extension Key not the
extension it resides on.
0 = Release
1 = Land On the Key
(default = 0)
3
15-18-02 Virtual Extension Key Enhanced
Options – Display Mode When
Placing a Call on Virtual
Extension Key
Defines if calls to or from a Virtual
Extension Key display the Virtual
Extension Key name or the name of
the extension it resides on.
0 = Secondary
Extension Name
1 = Actual Station
Name
(default = 0)
3
20-04-03 System Options for Virtual
Extensions – CAR/SIE/Virtual
Extension Delay Interval
CAR Keys/SIE Keys/Virtual
Extensions set for Delayed Ringing
(see Program 15-11) ring the
extension after this interval.
0~64800
(default = 10 seconds)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
20-07-10 Class of Service Options
(Administrator Level) –
Programmable Function Key
Programming (Appearance
Level)
Turns Off (0) or On (1) the ability for
an extension to program the
Appearance function keys using
Service Code 752.
0 = Off
1 = On
(default = 1 for COS
01~15)
3
20-10-08 Class of Service Options
(Answer Service) – Virtual
Extension Off-Hook Answer
Turns Off (0) or On (1) an extension
ability to answer an incoming call on
a Call Arrival (CAR)/Secondary
Incoming Extension (SIE)/ Virtual
Extension simply by lifting the
handset.
0 = Off
1 = On
(default = 1 for COS
01~15)
3
20-13-27 Class of Service Options
(Supplementary Service) – Busy
on Seizing Virtual Extension
If set to 1, a busy extension can be
called, while someone is talking on
a virtual extension key. Program
20-13-06 (Call Waiting) must be set
to off for this option to work.
1 = Off
0 = On
(default = 1 for COS
01~15)
3
21-01-15 System Options for Outgoing
Calls – Outgoing Disable on
Incoming Line (Toll Restriction)
Enable or Disable the Outgoing
Disable on Incoming Line feature.
0 = Disable (Off)
1 = Enable (On)
(default = 1)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
To Next Page
Loading...
