EasyManua.ls Logo

NEC Univerge SV8100 - Page 190

NEC Univerge SV8100
1386 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 1.0 UNIVERGE SV8100
2 - 166 Call Forwarding, Off-Premise
Calls to extensions with DND active do not follow Call Forwarding programming. DIL calls
ring an idle Department Group member, then follow Program 22-08 programming then
Program 22-05 programming.
Door Boxes must be programmed for the calls to be transferred Off-Premise.
The outside number Call Forwarding dials can be only a number normally allowed by the
forwarded extension Toll Restriction.
In systems with a DSP daughter board for VRS, callers to an extension forwarded
off-premise hear, “Please hold on, your call is being rerouted.” This option can be disabled in
Program 40-10-01 by setting it to disable.
When a station is in DND and any Call Forwarding Off Premise is set, the call forwards
immediately.
Call Forwarding, Off-Premise is not supported when using Alternate Trunk Group Routing.
Default Setting
Disabled
System Availability
Terminals
All Stations
Required Component(s)
None

Table of Contents

Other manuals for NEC Univerge SV8100

Related product manuals