UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 167
Related Features
Call Arrival (CAR) Keys
Call Forwarding
Code Restriction
Direct Inward Dialing (DID)
Do Not Disturb
Door Box
Virtual Extensions
Voice Response System (VRS)
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
10-09-01 DTMF and Dial Tone Circuit
Setup
Allocate the circuits on the
CD-CP00-AU ETUs for either
DTMF receiving or dial tone
detection.
0 = Common Use
1 = Extension Only
2 = Trunk Only
Default:
Circuit/Resource
01~08 = 1 (Extensions)
Circuit/Resource
09~32 = 2 (Trunks)
Circuit/Resource
33~96 = 0 (Not Used)
Circuit/Resource
97~160 = 0 (Common)
When PZ-BS10 is
installed, 97~160 are
available
3
To Next Page
Loading...
