NEC Univerge SV8100 - Page 192

Issue 1.0 UNIVERGE SV8100
2 - 168 Call Forwarding, Off-Premise
11-07-01 Department Group Pilot
Numbers – Dial
Use to assign pilot numbers to each
Department Group set up.
Up to eight digits
(default not assigned)
3
11-11-01 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– All
Use to assign the Call Forward All
Service Code.
MLT, SLT
(default = 741)
3
11-11-02 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Busy
Use to assign the Call Forward
Busy Service Code.
MLT, SLT
(default = 742)
3
11-11-03 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– No Answer
Use to assign the Call Forward No
Answer Service Code.
MLT, SLT
(default = 743)
3
11-11-04 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Busy/No Answer
Use to assign the Call Forward
Busy No Answer Service Code.
MLT, SLT
(default = 744)
3
11-11-05 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Both Ring
Use to assign the Call Forward Both
Ring Service Code.
MLT, SLT
(default = 745)
3
11-11-45 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward All (Split)
Use to assign the Call Forward All
Split Service Code.
MLT, SLT
(default not assigned)
3
11-11-46 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Busy (Split)
Use to assign the Call Forward
Busy Split Service Code.
MLT, SLT
(default not assigned)
3
11-11-47 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward No Answer (Split)
Use to assign the Call Forward No
Answer Split Service Code.
MLT, SLT
(default not assigned)
3
11-11-48 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Busy/No Answer
(Split)
Use to assign the Call Forward
Busy No Answer Split Service
Code.
MLT, SLT
(default not assigned)
3
11-11-49 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Both Ring (Split)
Use to assign the Call Forward Both
Ring Split Service Code.
MLT, SLT
(default not assigned)
3
11-11-52 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward All Destination (No
Split)
Use to assign the Call Forward All
for any Extension Service Code.
MLT, SLT
(default = 790)
3
11-11-53 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Busy Destination
(No Split)
Use to assign the Call Forward
Busy for any Extension Service
Code.
MLT, SLT
(default = 791)
3
11-11-54 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward No Answer
Destination (No Split)
Used to assign the Call Forward No
Answer for any Extension Service
Code.
MLT, SLT
(default = 792)
3
11-11-55 Service Code Setup (for Setup/
Entry Operation) – Set/Cancel
Call Forward Busy/No Answer
Destination (No Split)
Use to assign the Call Forward
Busy No Answer for any Extension
Service Code.
MLT, SLT
(default = 793)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3