NEC Univerge SV8100 - Page 193

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 169
14-01-13 Basic Trunk Data Setup – Loop
Supervision
Enable (1) loop supervision for
each trunk that should be able to
use Call Forwarding Off-Premise.
15-07-01 Programmable Function Keys Use to assign functions to multiline
terminal line keys.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

00 ~

99
(Appearance Function
Code) (Service Code
752 by default)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
 With this option set to 1, the
destination extension must be
busy for a second DNIS caller
to ring through. If the
destination extension does not
have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless of
this program setting.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
Turns Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-12 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding Off-Premise
(External Call Forwarding)
In an extensions Class of Service,
turns On (1) or Off (0) setting up
Call Forwarding Off-Premise at the
extension.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
Turns On (1) or Off (0) the ability of
an extension to receive Off-Hook
Signals.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Allows a busy extension ability to
Manually (0) or Automatically (1)
receive Off-Hook signals.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3