NEC Univerge SV8100 - Page 251

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 227
22-04-01 Incoming Extension Ring Group
Assignment
Assign extensions to ring groups. Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
3
22-05-01 Incoming Trunk Ring Group
Assignment
To have the trunks ring extensions,
assign trunks to a Ring Group. The
incoming ring group assignment
programmed in Program 41-03-01
overrides the setting in this
program.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
3
22-06-01 Normal Incoming Ring Mode Indicate whether the trunks in the
Ring Group assigned in Program
22-04-01 should ring (1) or not ring
(0).
0 = No Ring
1 = Ring
(default = 1)
3
22-07-01 DIL Assignment Assign the destination extension for
each DIL incoming trunk (001~200).
 For this selection to work, set
Program 22-02-01 to 4 = DIL.
Extension Number
(maximum eight digits)
(default not assigned)
3
22-08-01 DIL/IRG No Answer Destination If an incoming trunk call rings longer
than the DIL No Answer Time
(Program 22-01-04), it routes to the
destination you specify in this
option. Determine if the destination
should be a Ring Group, In-Skin/
External Voice Mail, or Central
Voice Mail.
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
3
23-03-01 Universal Answer/Auto Answer Use this program to let an extension
user automatically answer trunk
calls that ring other extensions.
When the user lifts the handset,
they automatically answer the
ringing calls based on Trunk Group
Routing programming (defined in
Program 14-06).
Maximum eight digits
Day/Night Mode
1~8
Route Table Number
0~100
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3