NEC Univerge SV8100 - Page 258

Issue 1.0 UNIVERGE SV8100
2 - 234 Central Office Calls, Placing
15-02-01 Multiline Telephone Basic Data
Setup – Display Language
Selection
(To select options 8~10, press
either 8 or Recall, then press line
keys 1~3. Key 1 is option 8, Key 2
is option 9, and Key 3 is option 10.)
Use to define the display language
for Multiline terminals.
0 = Japanese
1 = English
2 = German
3 = French
4 = Italian
5 = Spanish
6 = Dutch
7 = Portuguese
8 = Norwegian
9 = Danish
10 = Swedish
11 = Turkish
12 = Latin American
Spanish
13 = Romanian
14 = Polish
(default = 1)
3
15-02-08 Multiline Telephone Basic Data
Setup – Automatic Handsfree
Use this option to set whether
pressing a key accesses a
One-Touch Key (1) or if it preselects
the key (0).
0 = Preselect
1 = One-Touch
(Automatic Handsfree)
(default = 1)
3
15-03-03 Single Line Telephone Basic
Data Setup – Terminal Type
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mai or Conference
portsl, always enter 1 (e.g., receive
DTMF tones).
0 = Normal
1 = Special
(default = 0)
3
15-06-01 Trunk Access Map for
Extensions
Assign Trunk Access Maps to
extensions.
Trunks 1~200
(default = 1)
3
15-07-01 Programmable Function Keys To simplify placing calls, assign
function keys for placingt trunk
calls: Line keys (code 01 + trunk),
Trunk Group keys (code 02 +
group), Call Appearance (CAP)
keys (code 08 + Bin No.
Trunks 1~200
3
20-02-06 System Options for Multiline
Telephones – Preselection Time
Set the preselection time When a
multiline terminal user preselects a
line key, the system remembers the
preselection for this time.
0~64800 (seconds)
(default = 5 seconds)
3
20-02-09 System Options for Multiline
Telephones – Disconnect
Supervision
Use this option to Enable (1) or
Disable (0) disconnect supervision
for the system trunks.
0 = Disable
1 = Enable
(default = 1)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3