NEC Univerge SV8100 - Page 267

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 243
20-07-26 Class of Service Options
(Administrator Level) – Dial-In
Mode Switch
Enable or Disable an extension
user ability to set or cancel dial-in
mode switch.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-07-27 Class of Service Options
(Administrator Level) –
Do-Not-Call Administrator
Enable or Disable an extension
user ability to set or cancel do not
call administrator.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-01 Class of Service Options
(Outgoing Call Service) –
Intercom Calls
Turns Off or On Intercom calling for
the extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-02 Class of Service Options
(Outgoing Call Service) – Trunk
Outgoing Calls
Turns Off (0) or On (1) outgoing
trunk calling for the extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-03 Class of Service Options
(Outgoing Call Service) – System
Speed Dialing
Turns Off (0) or On (1) an
extension ability to make outbound
calls using system speed dial
numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-04 Class of Service Options
(Outgoing Call Service) – Group
Speed Dialing
Turns Off (0) or On (1) an extension
ability to make outbound calls using
group speed dial numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-05 Class of Service Options
(Outgoing Call Service) – Dial
Number Preview (Preset Dial)
Turns Off or On extension user
ability to use Dial Number Preview.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-06 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Override
Turns Off or On Toll Restricting
Override (Service Code 663).
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-07 Class of Service Options
(Outgoing Call Service) – Repeat
Redial
Turns Off (0) or On (1) an extension
to use Repeat Redial.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-08 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Dial Block
Turns Off or On an extension user
ability to use Dial Block.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-09 Class of Service Options
(Outgoing Call Service) –
Hotline/Extension Ringdown
Turns Off or On Ringdown
Extension for extensions with this
COS.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-10 Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
Turns Off or On an extension
allowing it to force Handsfree
Answerback or Forced Intercom
Ringing for outgoing Intercom calls.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3