NEC Univerge SV8100 - Page 268

Issue 1.0 UNIVERGE SV8100
2 - 244 Class of Service
20-08-11 Class of Service Options
(Outgoing Call Service) – Protect
for the Call Mode Switching from
Caller
When an extension is set to ring
mode for ICM calls, enabling this
option prevents callers from
changing the call to voice announce
mode.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-12 Class of Service Options
(Outgoing Call Service) –
Department Group Step Calling
Turns Off or On an extension user
ability to use Department Group
Step Calling.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
Determine if the ISDN calling line
identity presentation and screening
indicators are to be allowed.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-14 Class of Service Options
(Outgoing Call Service) – Call
Address Information
Use to Enable or Disable Call
Address Information for each Class
of Service.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
Turns Off (0) or On (1) a user Class
of Service from automatically
blocking outgoing Caller ID
information when a call is placed. If
block is enabled, the system
automatically inserts the Caller ID
block code 1831 (defined in
Program 14-01-21) before the user
dialed digits (this requires Program
14-02-10 to be enabled). If block is
disabled, the system outdials the
call just as it was dialed by the user.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E000 Dialed Extension Name and
Number
Turns Off or On an extension ability
to display the name and number of
the extension that dialed 000.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-17 Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
Turns Off or On an extension user
ability to override the trunk access
map programming for outgoing
calls.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-19 Class of Service Options
(Outgoing Call Service) – Hotline
for SPK
Turns Off or On an extension user
ability to activate hotline or
ringdown when pressing the
Speaker key.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-20 Class of Service Options
(Outgoing Call Service) – Hot
Key Pad
Turns On (1) or Off (0) the ability of
an extension to make a call by just
dialing the number without first
going off hook.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-21 Class of Service Options
(Outgoing Call Service) –
Automatic Trunk Seizing by
Pressing Speaker Key
Used to Enable or Disable the
ability to access trunks when going
off hook by pressing the speaker
key for each Class of Service.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3