NEC Univerge SV8100 - Page 272

Issue 1.0 UNIVERGE SV8100
2 - 248 Class of Service
20-11-14 Class of Service Options (Hold/
Transfer Service) –
Trunk-to-Trunk Transfer
Restriction
Turns Off (0) or On (1) the Trunk-to-
Trunk Transfer Restriction. If
enabled, Trunk-to-Trunk Transfer is
not possible.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-15 Class of Service Options (Hold/
Transfer Service) – VRS
Personal Greeting (Message
Greeting)
Turns Off or On an extension user
ability to dial Service Code 616 to
record, listen to or erase the
Personal Greeting Message.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-16 Class of Service Options (Hold/
Transfer Service) – Call Redirect
Turns On (1) or Off (0) a multiline
terminal user ability to transfer a call
to a predefined destination (such as
an operator, voice mail, or another
extension) without answering the
call.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group
Transfer)
Turns On (1) or Off (0) the ability of
an extension in a Department
Group to use the Trunk-to-Trunk
Forwarding service codes.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-18 Class of Service Options (Hold/
Transfer Service) – No Recall
Allow (0) or Deny (1) answered
Transferred calls from recalling the
originating extension.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
Determine whether an extension
Class of Service should allow
normal or extended Park
(0 = Normal for Program 24-01-06,
1 = Extended for Program
24-01-07).
0 = Off
1 = On
(default = 0 for COS
1~15)
3
20-11-20 Class of Service Options (Hold/
Transfer Service) – No Callback
Turns Off or On an extension ability
to receive Callbacks.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang Up
Allow (0) or Deny (1) an extension
users’s ability to set up a tandem/
conference call automatically when
they hang up.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-22 Class of Service Options (Hold/
Transfer Service) – Restrict
Unsupervised Conference
Allow or deny an extension user to
initiate a Trunk-to-Trunk Transfer
(Tandem Trunking).
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-11-23 Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
In an extension Class of Service,
turns On (1) or Off (0) the ability to
set and cancel Call Forwarding for a
CAR or Virtual Extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3