NEC Univerge SV8100 - Page 273

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 249
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
Set the hold type when a trunk call
is put on hold by an extension.
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold
(On)
(default = 1 for
COS 1~15)
3
20-11-25 Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
Turns On or off an extension user
ability to transfer a parked call.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-11-27 Class of Service Options (Hold/
Transfer Service) – Call Park
Automatically Search
Use this option to Turns On (1) or
Off (0) using the Call Park
Automatically Search option.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-12-02 Class of Service Options
(Charging Cost Service) –
Advice of Charge
ISDN-AOC
This option Turns Off (0) or On (1) a
DISA or tie trunk caller’s ability to
dial 9 for Trunk Group Routing or
Automatic Route Selection.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-12-03 Class of Service Options
(Charging Cost Service) – Cost
Display (TTU)
ISDN billing information 0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-01 Class of Service Options
(Supplementary Service) – Long
Conversation Alarm
Turns Off (0) or On (1) the Warning
Tone for Long Conversation (not for
single line telephones).
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-02 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Incoming)
Turns Off or On an extension user
ability to use Long Conversation
Cutoff for incoming calls.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-03 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Outgoing)
Turns Off or On an extension user
ability to use Long Conversation
Cutoff for outgoing calls.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-13-04 Class of Service Options
(Supplementary Service) – Call
Forward/DND Override (Bypass
Call)
Turns On or Off the ability to use
Call Forwarding/DND Override.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
Turns On (1) or Off (0) the ability of
an extension to receive Off-Hook
Signals.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Allows a busy extension ability to
Manually (0) or Automatically (1)
receive Off-Hook signals.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3