NEC Univerge SV8100 - Page 278

Issue 1.0 UNIVERGE SV8100
2 - 254 Class of Service
20-14-04 Class of Service Options for
DISA/E&M – Outgoing System
Speed Dialing
This option Enables or Disables a
DISA or tie trunk caller’s ability to
use System Speed Dialing.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-14-05 Class of Service Options for
DISA/E&M – Operator Calling
This option Enables or Disables a
DISA or tie trunk caller’s ability to
dial 0 for the telephone system
operator.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-14-06 Class of Service Options for
DISA/E&M – Internal Paging
This option Enables or Disables a
DISA or tie trunk caller’s ability to
use the telephone system Internal
Paging.
0 =Off
1 = On
(default = 1 for
COS 1~15)
3
20-14-07 Class of Service Options for
DISA/E&M – External Paging
This option Enables or Disables a
DISA or tie trunk caller’s ability to
use the telephone system External
Paging.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-14-08 Class of Service Options for
DISA/E&M – Direct Trunk Access
This option Enables or Disables a
DISA or tie trunk caller’s ability to
use Direct Trunk Access (Service
Code 715).
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-14-09 Class of Service Options for
DISA/E&M – Forced Trunk
Disconnect <Not for ISDN
T-point>
This option Enables or Disables a
tie trunk caller’s ability to use
Forced Trunk Disconnect (Service
Code 26). This option is not
available to DISA callers.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-14-10 Class of Service Options for
DISA/E&M – Call Forward Setting
by Remote via DISA
Enable or Disable a DISA callers
ability to use the Call Forward
service codes (Program 11-11-01
through Program 11-11-05).
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-14-11 Class of Service Options for
DISA/E&M – DISA/Tie Trunk
Barge-In
In an extension Class of Service,
Enable (1) or Disable (0) a DISA or
tie trunk user from using the Barge-
In feature.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-14-12 Class of Service Options for
DISA/E&M – Retrieve Park Hold
Turns Off or On the ability for a
DISA caller to retrieve parked or
held calls.
0 = Off
1 = On
(default = 1
for COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3