UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 255
Operation
To change an extension Class of Service (via Service Code 677):
1. Press Speaker.
2. Dial 677.
3. Dial the extension number you want to change.
You see: MODE1:nn
Press Hold to leave the current value unchanged.
The extension you dial may be set to block your attempt to change their Class of Service.
4. Enter the Day 1 Mode Class of Service for the extension you selected in step 3 and press Hold.
You see: MODE2:nn
Press Hold to leave the current value unchanged.
5. Enter the Night 1 Mode Class of Service for the extension you selected in step 3 and press Hold.
You see: MODE3:nn
Press Hold to leave the current value unchanged.
6. Enter the Midnight 1 Mode Class of Service for the extension you selected in step 3 and press Hold.
You see: MODE4:nn
Press Hold to leave the current value unchanged.
7. Enter the Rest 1 Mode Class of Service for the extension you selected in step 3 and press Hold.
You see: MODE5:nn
Press Hold to leave the current value unchanged.
8. Enter the Day 2 Mode Class of Service for the extension you selected in step 3 and press Hold.
You see: MODE6:nn
Press Hold to leave the current value unchanged.
9. Enter the Night 2 Mode Class of Service for the extension you selected in step 3 and press Hold.
You see: MODE7:nn
Press Hold to leave the current value unchanged.
10. Enter the Midnight 2 Mode Class of Service for the extension you selected in step 3 and press Hold.
You see: MODE8:nn
Press Hold to leave the current value unchanged.
11. Enter the Rest 2 Mode Class of Service for the extension you selected in step 3 and press Hold.
You see: Enter Station#
12. Go to step 3 and enter another extension number.
- OR -
Press Speaker to hang up.
To Next Page
Loading...
