NEC Univerge SV8100 - Page 287

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 263
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
 Level 1 – these are the most commonly assigned programs for this feature.
 Level 2 – these are the next most commonly assigned programs for this feature.
 Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
15-17-01 CO Message Waiting Indication –
LED Flash Assignment
Use to set the message waiting
LED Flash assignment on each CO
line.
0 = LED Off
1 = LED On
(default = 0)
3
20-02-08 System Options for Multiline
Telephones – LCD Display
Holding Time
This time determines how long a
user's display shows Caller ID for a
second incoming call.
0~64800 (seconds)
(default = 5 seconds)
3
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) to
extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
3
20-07-23 Class of Service Options
(Administrator Level) – CO
Message Waiting Indication
Callback Number Programming
Enable or Disable an extension
ability to receive CO Message
Waiting Indication.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
21-22-01 CO Message Waiting Indication –
Call Back Settings – CO MWI Call
Back Enabling
Enable or Disable CO MWI Call
Back.
0 = Disable VMWI
Service
1 = Enable VMWI
Service
(default = 0)
3
21-22-02 CO Message Waiting Indication –
Call Back Settings – CO-MWI
Call Back Number Area Setting
Define the Speed Dial Bin number
for MWI Call Back.
0000~1999
1999
3