NEC Univerge SV8100 - Page 288

Issue 1.0 UNIVERGE SV8100
2 - 264 CO Message Waiting Indication
Operation
To program the CO Message Waiting Callback Speed Dial Bin from an Attendant Position:
1. Press Feature.
2. Dial 28.
3. Press the CO line.
4. Dial Speed Dial bin (default = 1999).
 The valid range is 0000~1999 and depends on system programming.
5. Press Feature.
To program the Central Office – Message Waiting Indication callback number from an Attendant
Position:
1. Press Feature.
2. Dial 29.
3. Press the CO line.
4. Dial the Central Office – Message Waiting Indication callback number.
 The Exit key is used to clear all digits.
5. Press Feature.
 This operation updates data in Program 13-04-01, a user can also edit the dial digits in Program 13-04-01 from
handset-programming or PCPro/WebPro.
To retrieve a Central Office – Message Waiting Indication:
1. Press Feature.
2. Dial 27.
3. Press the CO line key.
 The LCD indicates ‘ERROR’ if the CO Line is not flashing for a CO Message Waiting.
4. Listen to the message.
 The operation for deletion is based on the remote voice mail system.
5. Hang up.
To clear the Central Office – Message Waiting Indication from an Attendant Position:
1. Press Feature.
2. Dial 20.
3. Press the CO line key.