UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 271
21-05-04 Toll Restriction Class –
Maximum Number of Digits Table
Assignment
Select the table (defined in Program
21-06-03) to be used to determine
the maximum number of digits
allowed for outgoing calls.
1~4 =Table
0 =Disable (None)
Default:
1, 2, 6~15 = 0
3 = 1
4 = 2
5 = 3
3
21-05-05 Toll Restriction Class – Common
Permit Code Table
It chooses whether the table set up
by Program 21-06-04 is referred to,
or not referred to.
0 = Unassigned
1 = Assigned
Default:
1, 8~15 = 0
2~7 = 1
3
21-05-06 Toll Restriction Class – Common
Restriction Table
It chooses whether the table set up
by Program 21-06-05 is referred to,
or not referred to.
0 = Unassigned
1 = Assigned
Default:
1, 6~15 = 0
2~5 = 1
3
21-05-07 Toll Restriction Class – Permit
Code Table
Set the tables 1~4 when referring to
the table set up by Program 21-06-
06.
1~4 =Table
0 = Disable (None)
Default:
1, 2, 6~15 = 0
3 = 1
4 = 2
5 = 3
3
21-05-08 Toll Restriction Class –
Restriction Table
Set the tables 1~4 when referring to
the table set up by Program 21-06-
07.
1~4 =Table
0 = Disable (None)
Default:
1, 2, 6~15 = 0
3 = 1
4 = 2
5 = 3
3
21-05-09 Toll Restriction Class –
Restriction for Common Speed
Dials
For the Code Restriction Class you
select, Enable (1) or Disable (0)
Code Restriction for Common
Speed Dialing numbers.
0 = Does Not Restrict
1 = Following
Restriction Check
(default =0)
3
21-05-10 Toll Restriction Class –
Restriction for Group Speed
Dials
For the Toll Restriction Class you
select, Enable (1) or Disable (0)
Code Restriction for Group Speed
Dialing numbers.
0 = Does Not Restrict
1 = Following
Restriction Check
(default =0)
3
21-05-11 Toll Restriction Class – Intercom
Call Restriction
For the Toll Restriction Class you
select, Enable (1) or Disable (0)
Intercom Call Restriction. If
enabled, extensions cannot place
or receive Intercom calls.
0 = Disable
1 = Enable
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
To Next Page
Loading...
