NEC Univerge SV8100 - Page 297

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 273
Operation
To place a trunk call if your system is Code Restricted:
1. Place call normally.
 If your Code Restriction Class does not allow the number you dial, your call is cut off.
34-08-01 Toll Restriction Data for E&M Tie
Lines
Define the Toll Restriction data for
E&M Tie Lines. This data should be
defined if Tie Line Code Restriction
is enabled in Program 21-05-13.
Up to 10 digits
(0~9, ,
#)
(default not assigned)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3