NEC Univerge SV8100 - Page 301

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 277
21-14-02 Walking Toll Restriction
Password Setup – Walking Toll
Restriction Class Number
Enter the Walking Toll Restriction Class of
Service (1~15) to be used for each table
number assigned in Program 21-14-01.
1~15
(default = 1)
3
35-02-01 SMDR Output Options – Toll
Restricted Call
SMDR can include or exclude calls
blocked by Toll Restriction.
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-02 SMDR Output Options – PBX
Calls
When the system is behind a PBX, SMDR
can include all calls or just calls dialed
using the PBX trunk access code.
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-03 SMDR Output Options – Trunk
Number or Name
Select whether the system should display
the trunk Name (0) or the Number (1) on
SMDR reports.
 If this option is set to 0, Program 35-
02-14 must be set to 0.
0 = Name
1 = Number
(default = 1)
3
35-02-04 SMDR Output Options –
Summary (Daily)
Set this option to (1) to have the SMDR
report provide a daily summary (at
midnight every night).
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-05 SMDR Output Options –
Summary (Weekly)
Set this option to (1) to have the SMDR
report provide a weekly summary (every
Saturday at midnight).
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-06 SMDR Output Options –
Summary (Monthly)
Set this option to (1) to have the SMDR
report provide a monthly summary (at
midnight on the last day of the month).
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-07 SMDR Output Options – Toll
Charge Cost
Set this option to (1) have the SMDR
report include toll charges.
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-08 SMDR Output Options – Incoming
Call
Enable this option (1) to have the SMDR
report include incoming calls. If you
disable this option (0), incoming calls do
not print.
0 = Not Displayed
1 = Displayed
(default = 1)
3
35-02-09 SMDR Output Options –
Extension Number or Name
Set this option (1) to have the SMDR
report include extension numbers. Set
this option (0) to have the SMDR report
include extension names.
0 = Name
1 = Number
(default = 1)
3
35-02-10 SMDR Output Options – All Lines
Busy (ALB) Output
Determine if the All Lines Busy (ALB)
indication should be displayed.
0 = Not Displayed
1 = Displayed
(default = 0)
3
35-02-12 SMDR Output Options – DID
Table Name Output
Determine if the DID table name should
be displayed.
0 = Not Displayed
1 = Displayed
(default = 0)
3
35-02-13 SMDR Output Options – CLI
Output When DID to Trunk
Determine if the CLI output should be
displayed for DID.
0 = Not Displayed
1 = Displayed
(default = 0)
3
35-02-14 SMDR Output Options – Date Determine whether the date should be
displayed on SMDR reports.
 This option must be set to 0 if the
trunk name is set to be displayed in
Program 35-02-03.
0 = Not Displayed
1 = Displayed
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3