NEC Univerge SV8100 - Page 302

Issue 1.0 UNIVERGE SV8100
2 - 278 Code Restriction Override
35-02-15 SMDR Output Options – CLI/DID
Number Switching
Determine whether or not the CLI/DID
Number Switching should be displayed.
0 = CLI (CLIP)
1 = DID Calling
Number
(default = 0)
3
35-02-16 SMDR Output Options – Trunk
Name or Received Dialed Number
Determine how the SMDR should print
incoming calls on ANI/DNIS or DID
trunks. If set to (1), ANI/DNIS trunks can
print DNIS digits. If set to (0) trunk names
are printed instead.
0 = Trunk Port
Name
1 = Received Dialed
Number
(default = 0)
3
35-02-17 SMDR Output Options – Print
Account Code or Caller Name of
Incoming Call
Determine if SMDR should print Account
Code or Caller Name of Incoming Call.
0 = ACC
1 = CNAME
(default = 0)
3
35-02-18 SMDR Output Options – Print
Mode for Caller Name of
Incoming Call
Determine how SMDR should print Caller
Name of Incoming Call.
0 = Normal
1 = Line Feed
(default = 0)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3