NEC Univerge SV8100 - Page 376

Issue 1.0 UNIVERGE SV8100
2 - 352 Department Calling
Operation
To call a department group:
1. Go off-hook.
2. Dial department extension number.
 The system routes the call to the first free telephone in the department group.
3. Optional: To manually ring all members of the group, dial the single digit service code assigned for
All Member Ring (Program 11-16-10).
To log out of your Department Calling Group:

While you are logged out, Department Calling cannot route calls to your extension.
1. Press Speaker
2. Dial 650 + 1.
- OR -
Press Department Calling Log In key (Program 15-07-01 or SC 751: 46).
 The key lights while you are logged out.
To log back in to your Department Calling Group:

When you log back in, Department Calling routes calls to your extension.
1. Press Speaker.
2. Dial 650
+ 0.
- OR -
Press Department Calling Log In key (Program 15-07-01 or SC 751: 46).
 The key goes out when you log back in.
To change the Department Group Overflow Destination:
1. Press Speaker.
2. Dial 604 + Department Group (01 ~ 64).
3. Dial 01 ~ 08 (Refer to Program 24-05).
4. Dial the destination the calls route to.
5. Press Hold.