NEC Univerge SV8100 - Page 415

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 391
Operation
To answer a call on your Direct Inward Line:
1. Lift the handset.
2. Press the flashing line key for DIL on the multiline terminal.
 Pressing the flashing Answer Key puts the first call on hold and answers the second incoming call. This
can be repeated until all incoming calls are answered.
 If you have Ringing Line Preference, lift the handset to answer the call.
 If you do not answer the call, it may ring other extensions (i.e., the DIL No Answer Ring Group).
To place a call on your Direct Inward Line:
1. Lift the handset.
2. At the multiline terminal, press the line key for DIL.
- OR -
Dial # 9 and the DIL trunk number (e.g., 005).
- OR -
Dial 704 and the DIL trunk group number (e.g., 05).
- OR -
Dial 9 for Trunk Group Access.
3. Dial the number.