NEC Univerge SV8100 - 47-11 InMail Answer Table Options

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 415
Operation
Calling an extension from your DSS Console:
1. Press the DSS Console key.
 If the call voice-announces, you can make it ring by dialing 1.
 If you do not have Handsfree, you must lift the handset to speak.
Answering a trunk call from your DSS Console:
1. Press the flashing DSS Console key assigned to the trunk.
 If you do not have Handsfree, you must lift the handset to speak.
Transferring a call using your DSS Console:
1. Place or answer the call.
2. Press Transfer to transfer the call.
3. Press the DSS key for the extension to receive the transfer.
4. (Optional) Announce the call.
 If called party does not want the call, press the flashing line key to retrieve it.
30-05-20 DSS Console Lamp Table – Hotel
Status Code
# (Hotel DSS)
Use to define the LED patterns for
hotel status code
# on the DSS
consoles.
0~7
[default = 5 (IL)]
3
30-05-21 DSS Console Lamp Table – VM
Message Indication
Use to define the LED patterns for
VM message indications on the DSS
consoles.
0~7
[default = 3 (RW)]
3
30-10-01 DSS Console IP Terminal Setup –
MAC Address
Read Only program that displays the
MAC address of the IP terminal a
DSS console is associated with.
00-00-00-00-00-00 ~
FF-FF-FF-FF-FF-FF
(Default =
00-00-00-00-00-00)
3
Extension Busy Lamp Field
When the DSS key is...
On
Off
Flashing Fast
The assigned extension is...
Busy on a call
Idle
In Do Not Disturb
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3