Issue 1.0 UNIVERGE SV8100
2 - 416 Direct Station Selection (DSS) Console
Making an External Page using your DSS Console:
1. Press the DSS Console External Page zone key (1~8).
If the zone you want is busy, try again later.
If you do not have Handsfree, lift the handset to make your announcement.
Making an Internal Page using your DSS Console:
1. Press the DSS Console Internal Page zone key (Group key 1~64).
If the zone you want is busy, try again later.
If you do not have Handsfree, lift the handset to make your announcement.
Switching the Night Service mode from your DSS Console:
1. Press the Night Service key.
Using a DSS Console key as a One-Touch or Programmable Function Key:
A user can have DSS Console keys programmed as One-Touch Keys. These keys can be used for Direct Station Selection,
Trunk Calling, Personal Speed Dial, Speed Dialing, and Service Code access. The stored service code cannot be longer
than three digits.
1. Press the DSS Console key for function.
For example, you can forward your calls by pressing DSS key + 1 + destination. Your DSS key must have been
previously programmed for Call Forward.
External Page Busy Lamp Field
When the DSS key is...
On
Off
The External Page zone is...
Busy
Idle
Internal Page Busy Lamp Field
When the DSS key is...
On
Off
The Internal Page zone is...
Busy
Idle
Night Service Busy Lamp Field
When this key is ON...
DAY
NIGHT
BREAK
NIGHT 2
The system is in the...
Day 1 Mode
Night 1 Mode
Break 1 Mode
Night 2 Mode
To Next Page
Loading...
