NEC Univerge SV8100 - Page 451

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 427
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
 Level 1 – these are the most commonly assigned programs for this feature.
 Level 2 – these are the next most commonly assigned programs for this feature.
 Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3
15-02-02 Multiline Telephone Basic Data
Setup – Trunk Ring Tone
From the range specified in
Program 22-03-01, select the
multiline terminal extension trunk
ring tone.
1 = High
2 = Medium
3 = Low
4 = Ring Tone 1
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
(default = 2)
3
15-02-03 Multiline Telephone Basic Data
Setup – Extension Ring Tone
Select the extension intercom ring
tone.
1 = High
2 = Medium
3 = Low
4 = Ring Tone 1
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
(default = 8)
3
15-02-35 Multiline Telephone Basic Data
Setup – Message Waiting Lamp
Cycle for Calling Extension
Select the cycle method that the
Large LED flashes when the
extension has set Message
Waiting.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 7)
3
15-02-36 Multiline Telephone Basic Data
Setup – Message Waiting Lamp
Cycle for Called Extension
Select the cycle method that the
Large LED flashes when the
extension has Message Waiting set
to the extension.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 3)
3
15-02-37 Multiline Telephone Basic Data
Setup – Voice Mail Message Wait
Lamp Color
Use to set up various
message wait lamp cycle options
for lamp color.
0 = Green
1 = Red
(default = 1)
3