NEC Univerge SV8100 - 47-13 InMail Dial Action Tables

Issue 1.0 UNIVERGE SV8100
2 - 428 Distinctive Ringing, Tones and Flash Patterns
15-02-38 Multiline Telephone Basic Data
Setup – Voice Mail Message Wait
Lamp Cycle
Select the cycle method that the
Large LED flashes when the
extension has a VM Message
Waiting set to the extension.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 3)
3
15-08 Incoming Virtual Extension Ring
Tone Setup
Use to assign a ring tone range
(0~4) to incoming virtual extensions
assigned to a Virtual Extension key
(Program 15-07).
ICM Tone Pattern,
0 = Pattern 1
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
(default = 0)
3
15-10-01 Incoming Virtual Extension Ring
Tone Order Setup
When two or more virtual
extensions are set on a function key
on the telephone, and the tone
pattern by which the sound of each
extension differs, the priority of ring
sound is set up.
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
Ring Tone
Order 1 Pattern 0 =
Pattern 1 (default)
Order 2 Pattern 1 =
Pattern 2 (default)
Order 3 Pattern 2 =
Pattern 3 (default)
Order 4 Pattern 3 =
Pattern 4 (default)
3
20-13-49 Class of Service Options
(Supplementary Service) – BLF
Indication on CO Incoming State
Determine if a BLF of the station will
light when a Normal CO call is
ringing the phone.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-15-01 Ring Cycle Setup – Normal
Incoming Call on Trunk
Used to define the ringing cycle for
Normal Incoming Trunk calls.
Ringing Cycle = 1~13
(default = 3)
3
20-15-02 Ring Cycle Setup – PBX, CES
Incoming Call
Used to define the ringing cycle for
PBX, CES incoming calls.
Ringing Cycle = 1~13
(default = 8)
3
20-15-03 Ring Cycle Setup – Incoming
Internal Call
Used to define the ringing cycle for
incoming Internal Calls.
Ringing Cycle = 1~13
(default = 3)
3
20-15-04 Ring Cycle Setup – DID/DISA/
VRS
Used to define the ringing cycle for
DID/DISA/VRS Calls.
Ringing Cycle = 1~13
(default = 8)
3
20-15-05 Ring Cycle Setup – DID/DDI Used to define the ringing cycle for
DID/DDI calls.
Ringing Cycle = 1~13
(default = 8)
3
20-15-06 Ring Cycle Setup – Dial-In in the
E&M Tie Line
Used to define the ringing cycle for
Dial-In and E&M Tie Line calls.
Ringing Cycle = 1~13
(default = 12)
3
20-15-07 Ring Cycle Setup – Door Box
Ringing for SLT
Used to define the ringing cycle for
Door Box ringing for SLT.
Ringing Cycle = 1~13
(default = 8)
3
20-15-08 Ring Cycle Setup – Virtual
Extension Ring
Used to define the ringing cycle for
Virtual Extension Ringing.
Ringing Cycle = 1~13
(default = 8)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3