UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 443
Single Line Telephone
1. Lift the handset.
2. Dial 702.
3. Dial Door Box Number (1~8).
To activate the Door Box strike:
Multiline Terminal
1. While talking to the Door Box, press the Recall key.
Single Line 500/2500 Telephone
1. While talking to the Door Box, hookflash.
To answer a Door Box chime:
1. Lift the handset or press Speaker.
To Answer a Door Box call while busy on another call:
Multiline Terminal
If you are busy on a call, the display shows the incoming Door Box call and the large LED flashes.
1. Press Hold to place your active call on hold.
2. When you hear dial tone, dial the door box access code (702 by default) plus the door box number
(1~8) to answer the Door Box call.
To retrieve the original call, hang up with the door box and press Conf.
Single Line Telephone
If you are busy on a call, an off-hook signal is heard indicating the incoming Door Box call.
1. Press the Flash key or hookflash to place your active call on hold.
2. Dial the door box access code (702 by default) plus the door box number (1~8) to answer the Door
Box call.
To retrieve the original call, hang up. The original call rings the single line telephone.
To Next Page
Loading...
