NEC Univerge SV8100 - Page 466

Issue 1.0 UNIVERGE SV8100
2 - 442 Door Box
Operation
To call a Door Box:
Multiline Terminal
1. Press Speaker
2. Dial 702.
3. Dial Door Box Number (1~8).
32-01-03 Door Box Timers – Off-Premise
Call Forward by Door Box
Disconnect Timer
Define the conversation period for
an Off-Premise Call Forward by
Door Box call. When this timer
expires, the caller hears busy tone
for 3 seconds (fixed time), and the
call is then disconnected.
0~64800 (seconds)
(default = 60 seconds)
3
32-02-01 Door Box Ring Assignments Determine which Door Boxes
should ring which extensions by
entering the extension number.
Each Door Box can be programmed
to ring up to 32 extensions and an
extension can be programmed to
ring for multiple Door Boxes.
Maximum eight digits
(default not assigned)
3
32-03-01 Door Box Basic Setup – Chime
Pattern
Set the chime pattern (0~6) for
each Door Box.
0 = None
1 = Door Box Ring 1
2 = Door Box Ring 2
3 = Door Box Ring 3
4 = Door Box Ring 4
5 = Door Box Ring 5
6 = Door Box Ring 6
default:
Door Box 1 = 1
Door Box 2 = 2
Door Box 3 = 3
Door Box 4 = 4
Door Box 5 = 5
Door Box 6 = 6
Door Box 7 = 1
Door Box 8 = 1
3
32-03-02 Door Box Basic Setup – CODEC
Transmit Gain Setup
Set the Transmit Gain for each
Door Box.
1~63 (-15.5dB ~
+15.5dB)
(default = 32)
3
32-03-03 Door Box Basic Setup – CODEC
Receive Gain Setup
Set the Receive Gain for each Door
Box.
1~63 (-15.5dB ~
+15.5dB)
(default = 32)
3
32-04-01 Doorphone Name Setup This command defines the name of
each Doorphone
Up to 12 characters
(default not assigned)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3