NEC Univerge SV8100 - Page 517

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 493
20-07-18 Class of Service Options
(Administrator Level) – SMDR
Printout Accumulated Extension
Data
Use to define the Class of Service
(COS) for the SMDR printout of
accumulated extension data.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
3
20-07-19 Class of Service Options
(Administrator Level) – SMDR
Printout Department Group
(STG) Data
Use to define the Class of Service
(COS) for the SMDR printout of
department group (STG) data.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
3
20-07-20 Class of Service Options
(Administrator Level) – SMDR
Printout Accumulated Account
Code Data
Use to define the Class of Service
(COS) for the SMDR printout of
accumulated account code data.
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
3
20-07-21 Class of Service Options
(Administrator Level) – Register/
Delete DECT
Turns Off or On an extension ability
to register or unregister an
Wireless DECT (SIP) handset using
the service codes defined in
Program 11-10-30 and Program 11-
10-31.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-07-23 Class of Service Options
(Administrator Level) – CO
Message Waiting Indication
Callback Number Programming
Enable or Disable an extension
ability to receive CO Message
Waiting Indication.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-07-24 Class of Service Options
(Administrator Level) – Set/
Cancel Private Call Refuse
Enable or Disable an extension
user ability to set or cancel Private
Call Refuse.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-07-25 Class of Service Options
(Administrator Level) – Set/
Cancel Caller ID Refuse
Enable or Disable an extension
user ability to set or cancel Caller ID
Refuse.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-07-26 Class of Service Options
(Administrator Level) – Dial-In
Mode Switch
Enable or Disable an extension
user ability to set or cancel dial-in
mode switch.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-07-27 Class of Service Options
(Administrator Level) –
Do-Not-Call Administrator
Enable or Disable an extension
user ability to set or cancel do not
call administrator.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-01 Class of Service Options
(Outgoing Call Service) –
Intercom Calls
Turns Off or On Intercom calling for
the extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3