NEC Univerge SV8100 - Page 518

Issue 1.0 UNIVERGE SV8100
2 - 494 D
term
series i Multiline Terminals
20-08-02 Class of Service Options
(Outgoing Call Service) – Trunk
Outgoing Calls
Turns Off or On outgoing trunk
calling for the extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-03 Class of Service Options
(Outgoing Call Service) – System
Speed Dialing
Turns Off or On an extension user
ability to make outbound calls using
system speed dial numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-04 Class of Service Options
(Outgoing Call Service) – Group
Speed Dialing
Turns Off or On an extension user
ability to make outbound calls using
group speed dial numbers.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-05 Class of Service Options
(Outgoing Call Service) – Dial
Number Preview (Preset Dial)
Turns Off or On an extension user
ability to use Dial Number Preview.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-06 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Override
Turns Off or On Toll Restricting
Override (Service Code 663).
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-07 Class of Service Options
(Outgoing Call Service) – Repeat
Redial
Turns Off or On an extension user
abulity to use Repeat Redial.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-08 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Dial Block
Turns Off or On an extension user
ability to use Dial Block.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-09 Class of Service Options
(Outgoing Call Service) –
Hotline/Extension Ringdown
Turns Off or On Ringdown
Extension for extensions with this
COS.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-10 Class of Service Options
(Outgoing Call Service) – Signal/
Voice Call
Turns Off or On an extension user
ability allowing it to force Handsfree
Answerback or Forced Intercom
Ringing for outgoing Intercom calls.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-11 Class of Service Options
(Outgoing Call Service) – Protect
for the Call Mode Switching from
Caller
When an extension is set to ring
mode for ICM calls, enabling this
option prevents callers from
changing the call to voice announce
mode.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-12 Class of Service Options
(Outgoing Call Service) –
Department Group Step Calling
Turns Off or On an extension user
ability to use Department Group
Step Calling.
0 = Off
1 = On
(default = 1 for
COS 1~15)
3
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
Determine if the ISDN calling line
identity presentation and screening
indicatorsshould be allowed.
0 = Off
1 = On
(default =1 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3