NEC Univerge SV8100 - Page 519

UNIVERGE SV8100 Issue 1.0
SV8100 Features and Specifications Manual 2 - 495
20-08-14 Class of Service Options
(Outgoing Call Service) – Call
Address Information
Use to define the Class of Service
(COS) for call address information.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
Turns Off or On a user Class of
Service from automatically blocking
outgoing Caller ID information when
a call is placed. If block is enabled,
the system automatically inserts the
Caller ID block code 1831 (defined
in Program 14-01-21) before the
user dialed digits (this requires
Program 14-02-10 to be enabled). If
block is disabled, the system
outdials the call just as dialed by the
user.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E911 Dialed Extension Name and
Number
Turns Off or On an extension ability
to display the name and number of
the extension that dialed 911 (US
Only).
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-17 Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
Turns Off or On an extension ability
to override the trunk access map
programming for outgoing calls.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-19 Class of Service Options
(Outgoing Call Service) – Hotline
for SPK
Turns Off or On an extension user
ability to activate hotline or
ringdown when pressing the
Speaker key.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-20 Class of Service Options
(Outgoing Call Service) – Hot
Key Pad
Turns Off or On an extension user
ability to make a call by dialing the
number without first going off hook.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-21 Class of Service Options
(Outgoing Call Service) –
Automatic Trunk Seizing by
Pressing Speaker Key
Use to define the Class of Service
(COS) for automatic trunk seizing
by pressing speaker key.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
20-08-22 Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
Use to define the Class of Service
(COS) for voice over to busy virtual
extension.
0 = Off
1 = On
(default = 0 for
COS 1~15)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3